24
Press the
ASPECT
button to move through the seven aspect options:
Panasonic Auto
,
4:3
,
Zoom
,
S---Zoom
,
16:9
,
14:9
and
Just
.
Notes:
D
If you leave Aspect set to
Panasonic Auto,
the TV software determines the best ratio for each
programme viewed. In order not to disrupt your viewing, no mode information is displayed while
this is happening (eg: a programme may begin in
4:3
mode then seem to jump into
Just
mode).
Simply press the
ASPECT
button to display mode information in the top left of the screen.
D
A 16:9 picture has been used to illustrate all of the aspect modes described in this section.
The on screen selector keys (corresponding to the four coloured buttons on the remote control) that
appear for some Aspect functions clear after a few seconds. If you want to select an operation when the
keys are not shown, press the
ASPECT
button once more and the keys will reappear.
Panasonic Auto
Panasonic Auto
determines the best aspect
ratio to use to display the picture you are
viewing. It doesthis using a fourstep process to
determine if the picture being viewed is a
widescreen picture.
If
Panasonic Auto
detects a widescreen signal
it switches into the appropriate
16:9
or
14:9
widescreen mode. If
Panasonic Auto
does not
detect a widescreen signal then the picture is
displayed in
Just
or
4:3
mode.
The text shown on the screen indicates how
Panasonic Auto
determined which ratio to use:
’WIDE’ appears in the top left of the screen if a
widescreeen identification signal (WSS) is
found or a signal is found through a Scart
socket.
Panasonic Auto
switches to the
appropriate
16:9
or
14:9
widescreen ratio.
’Panasonic Auto’ appears in the top left of the
screen if black stripes above and below the
picture are detected.
Panasonic Auto
chooses
the best ratio and expands the picture to fill the
screen. This process can take several minutes,
depending how dark the picture is.
’Panasonic Auto’ appears in the top left of the
screen and red and green keys at the bottom if
no indication of a widescreen signal is found,
the picture is displayed in
Just
or
4:3
mode. If
the picture has a standard 4:3 aspect ratio then
you may prefer to view it at its original size, the
red and green keys that appear allow you to
choose between viewing at standard
4:3
size or
expanded in
Just
mode.
Equally, you may prefer to select one of the
other modes available to view the picture.
Notes:
D
If, in
Panasonic Auto
mode, you experience problems with the screen display size when playing back widescreen format
recordings from yourVCR then it is possiblethat the tracking controlof your VCRrequires adjustment (your VCRinstruction
book will contain adjustment details).
D
The widescreen aspect ratios of different films and programmes can vary. If these are wider than a standard 16:9 aspect
picture then a black band may be visible at the top and bottom of the screen.
Aspect controls
ASPECT
’PanasonicAuto’appearsinthetop
left of the screen. The picture is
displayed in
Just
or
4:3
mode, red
and green keys appear, allowing
switching between
Just
and
4:3
modes.
’PanasonicAuto’appearsinthetop
left of the screen. The best ratio is
chosen and the picture expanded
to fill the screen.
’WIDE’ appears in the top left of the
screen,
Panasonic Auto
switches
to the appropriate 16:9 or 14:9
widescreen ratio.
ASPECT
Panasonic Auto
Panasonic Auto
Panasonic Auto
To Next Page
Loading...
