35
With a DTS / Dolby Digital input or if
Pro Logic
is selected in
Surround mode
, the following three modes of operation are
available as the
Speaker setting
:
Normal
,
Phantom
,
3 Stereo
.
If external rear speakers and an external centre speaker
are connected, use
Normal
mode. Left and right
speaker information will be produced by the TV’s
internal left and right speakers. With a DTS / Dolby
Digital 5.1 input, the subwoofer / LFE speaker
informationisproducedbytheTV’sinternalsubwoofer.
If theinternal speakeris switchedoff (seepage 34)and
external left and right speakers used, the speakers
must be connected using RCA cables, via an external
amplifier (otherwise they will not output any sound).
See pages 39 and 40 for connection details.
If external front left, right and centre speakers are not
connected, use
Phantom
mode. Left,right, and centre
information will now be produced by the TV speakers.
Ifyouchoose tousethismodewiththe internalspeaker
switched off and external front left and right speakers
connected, these must be connected using RCA
cables,viaan externalamplifier(otherwise theywillnot
outputanysound).Seepages39and40forconnection
details.
Thisisthebestmodetouseiffrontandrearleftandright
speakers are not connected. When using this mode,
the left, right and rear left and right surround
information is produced by the TV’s internal left and
right speakers. If the internal speaker is switched off
(seepage34)andexternalleftandrightspeakersused,
theymustbeconnectedtotheTVusingRCAcables,via
anexternalamplifier (otherwisetheywillnot outputany
sound). See pages 39 and 40 for connection details.
Simulated
surround modes allow various types of surround effects to be produced by mimicking both the direct sound, as heard by
the audience, and the sound reflected back from the surrounding walls e.g. ceiling and floor space in a space such asa disco. There
are three different effects to choose from, each reflecting a different atmosphere:
Setting Appropriate sources Effect
Disco Disco, dance or jazz music A crowded nightclub
Movie All movies or music software recorded without Simulates a surround sound recording
Dolby Surround
Stadium Any live sports occasion A packed sports stadium
The speaker output levels from the different options, eg:
Left
,
Centre
,
Right
,
Rear left
and
Rear right
, should be adjusted from your usual
listening position, to obtain the best results. The level can be set using
either the TV sound or the provided test signal.
Notes:
D
The adjustments available will vary according to the mode chosen.
D
If you have a DTS / Dolby Digital 5.1 input, and are using the internal
subwoofer to produce the subwoofer / LFE information, you can
change the subwoofer / LFE volume by altering the
Subwoofer
setting in the
SOUND
menu. See page 15.
D
When using external stereo equipment, it is advisable to set the
speaker levels to the midpoint position.
DTS / Dolby Digital and Pro Logic modes
Normal
mode
Rear right
surround
speaker
Rear left
surround
speaker
Phantom
mode
Rear right
surround
speaker
Rear left
surround
speaker
3 Stereo
mode
Centre speaker
Centre speaker
Normal
Phantom
3 Stereo
Simulated mode
Speaker level setup
Speaker level
setup ---
Pro Logic, Normal
mode
To Next Page
Loading...
