Panasonic TX-L42ET61 - Shipping Condition; Updating the TV Software

- 140 -
1. Display the TV Selection screen with TV
2. Select the mode with
/ and press OK to set
DVB-C / DVB-T
3. Display the menu with MENU
4. Select Setup
Common Interface with / and press OK to access
5. Select Slot 1: with
/ , press OK and follow the on-screen instructions
●
On-screen instructions may not correspond to the remote control buttons.
Shipping Condition
Shipping Condition
Resets the TV to its original condition (i.e. no channels tuned in).
All settings other than USB Device Setup are reset (channels, picture, sound
settings, etc.).
1. Display the menu with MENU
2. Select Setup
System Menu Shipping Condition with / and press
OK to access
●
Child Lock PIN number is required depending on the country. If you
have forgotten your changed PIN, input “6969” as the PIN number.
Functions Child Lock PIN number
3. When the confirmation screen is displayed, select Yes with / and
press OK to set
4. Follow the on-screen instructions
●
Auto Setup will automatically start.
= Note =
●
To retune TV channels only (e.g. after moving house), set Auto Setup.
Watching Tuning and editing channels Auto Setup
Updating the TV Software
Information
A new version of software may be released for download to enhance the
performance or operations of the TV.
If there is an update available and the channel has the update information, a
notification message is displayed.
●
To install new software, select Standby / Now with / and press OK to
set.