- 141 -
Standby:
Installs new software in standby condition.
Now:
Installs new software now.
Auto update
You can update new software automatically.
1. Display the menu with MENU
2. Select Setup
System Menu System Update Auto Update Search in
Standby with / and press OK to access
3. Select the time with
/ and press OK to set
●
If any software updates are available, the notification message will appear.
To install new software, select Standby / Now with / and press OK to
set.
Standby:
Installs new software in standby condition.
Now:
Installs new software now.
●
If System Update is performed, the software will be updated (TV functions
may be changed). If you do not want to do so, set Auto Update Search in
Standby to Off.
●
The automatic updating is performed while the recording of Timer
Programming or One Touch Recording is not in progress.
= Note =
●
Download may take a few hours.
●
During software download and update, DO NOT switch off the TV.
●
A notification message may be a reminder. In this case, schedule
information (the date when the new version can be used) will appear. You
can set the reservation for update. The update will not start when the TV is
off.
Manual update
You can update new software manually.
1. Display the menu with MENU
2. Select Setup
System Menu System Update System Update Search
Now with
/ and press OK to access
3. Searches for an update (for several minutes) and displays a corresponding
message if any
To Next Page
Loading...
