- 47 -
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
●
Not valid when 3D Detection is set to On (Advance)
●
For DVB, Component and HDMI input
2D
3D Depth
(Max / Mid / Min)
Selects a level of 3D-image depth for viewing converted 2D images.
3D Adjustment
(On / Off)
Adjustment of the 3D effect (except in 2D
3D mode).
Set to On to enable Effect setting.
●
When setting to On, a safety precaution message will appear. Read it
carefully and press BACK/RETURN to go to Effect setting.
●
When adjusting, take into account that the vision of 3D images varies
among different individuals.
Effect:
Adjusts the 3D depth according to the contents or to your preference.
(This setting will not be memorised when changing the input mode or
channel.)
L/R Picture Swap
(L/R (Normal) / R/L (Reversed))
Swaps pictures for left eye and right eye (except in 2D
3D mode).
Select R/L (Reversed) if you feel that the sense of depth is unusual.
●
This setting will not be memorised when changing the input mode or
channel.
Edge Smoother
(On / Off)
Set to On if you feel the contoured parts of an image are not smooth enough
(except in 2D
3D mode).
To Next Page
Loading...
