213
UF-7300/7200
UF-8300/8200
8.3. Installing the 2nd Paper Feed Module (UE-409080)
8.3.1. Contents
Visually check the condition and contents of the box for completeness, or for any shipping damage before
starting the installation.
Remove all tapes, and the packing materials used to secure the units during shipment.
After unpacking, dispose of the packing materials appropriately.
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories in details.
8.3.2. Installation
CAUTION!
Unplug the AC Power Cord before beginning installation.
No. Qty. Description Remarks
1 1 2nd Paper Feed Module
22Bracket F
31Bracket R1
41Bracket R2
5 2 Flat Clamp
6 4 Screw (M3 x 8)
7 4 Screw (M4 x 8)
8 2 Washer-head Screw
9 1 Installation Instructions This document
(1) Remove 1 Screw, and the SD Card Cover.
(2) Remove 7 Screws.
(3) Remove the Rear Cover.
Caution:
Remove the SD Memory Card if it was installed.
1 2 3 4
65 7
9
8