199
UF-7300/7200
UF-8300/8200
7Installation
Refer to the Operating Instructions (For Basic Operations).
Note:
Some models (i.e. USA/GSA models) may have the Power Switch.
Fax Parameter Table (AU) for reference
No. Parameter
Setting
Number
Setting Comments
001 CONTRAST
(HOME)
1 Lightest Setting the home position for the CONTRAST.
2Lighter
*3 Normal
4Darker
5Darkest
002 RESOLUTION
(HOME)
*1 Standard Setting the home position for the RESOLUTION.
2Fine
3S-Fine
4 600dpi
5 Halftone
(Fine)
6 Halftone
(S-Fine)
7 Halftone
(600dpi)
004 STAMP (HOME) *1 Off Setting the home position for the STAMP.
To select the stamp function when the document is
stored in memory, see Fax Parameter No.28 (STAMP AT
MEM. XMT).
2On
005 MEMORY
(HOME)
1 Off Setting the home position for the MEMORY.
*2 On
006 DIALING
METHOD
1 Pulse Selecting the dialing method.
*2 Tone
007 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside:
Inside TX copy area.
Outside:
Outside TX copy area.
No print:
Header is not printed.
2 Outside
3No print
008 HEADER
FORMAT
*1 Logo, ID No. Selecting the header format.
2From To
009 RCV'D TIME
PRINT
*1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page
number on the bottom of each received document.
2 Valid
010 KEY/BUZZER
VOLUME
1 Off Selecting the key touch beep sound.
*2 Soft
3 Loud
To Next Page
Loading...
