Panasonic UF-7300 - Page 200

200
UF-7300/7200
UF-8300/8200
012 COMM.
JOURNAL
1 Off Selecting the home position of printout mode for COMM.
Journal Off / Always / Inc. only.
Off:
Does not print
Always:
Always prints
Inc. Only:
Prints only when communication has failed.
2Always
*3 Inc. Only
013 AUTO JRNL
PRINT
1 Invalid Selecting whether the machine prints the journal
automatically after every 200 transactions.
*2 Valid
014 FILE ACCEPT
REP.
*1 Invalid Selecting whether the machine prints the file acceptance
journal.
If you set this parameter to “2:Valid”, a journal will be
printed out after a new job is stored in the memory.
2Valid
017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
*2 Auto
022 SUBSTITUTE
RCV
1 Invalid Selecting whether the machine receives to memory when
the recording paper runs out, toner runs out or the
recording paper is jammed.
*2 Valid
023 REC. PAPER
SIZE
(----) Selecting the Paper Tray and paper size.
024 PRINT
REDUCTION
1 Fixed Selecting print reduction mode.
Fixed:
Reduce received document according to setting of
Parameter No.25.
Auto:
Reduce received document according to the length of
received documents.
*2 Auto
025 REDUCTION
RATIO
70 70% Selecting the fixed print reduction ratio from 70% to
100%.
This parameter functions only when the fixed print
reduction is selected on Fax Parameter No.24 (PRINT
REDUCTION).
---- ----
*100 100%
026 POLLING
PASSWORD
(----) Setting 4 digits password for secured polling.
027 POLLED FILE
SAVE
*1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
2Valid
028 STAMP AT MEM.
XMT
1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
(depending on the Stamp setting on the Control Panel. If
the setting is “1:Invalid”, the machine will not stamp even
if the Stamp LED light is ON)
*2 Valid
031 INC. FILE SAVE *1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2Valid
034 ENERGY SAVER
MODE
1 Invalid Select Energy Saver mode and time.
1:Invalid / 2:Power Saver / 3:Sleep / 4:Shutdown Mode
timer:1-240 min.
2 Power
Saver
*3 Sleep
4 Shutdown
No. Parameter
Setting
Number
Setting Comments