Panasonic UF-7300 - Page 201

201
UF-7300/7200
UF-8300/8200
035 DAYLIGHT TIME 1 Off Selects whether to enable the daylight time feature.
*2 Mar 2nd
3 Apr 1st
036 RING
PATTERN(DRD)
*1 Invalid All ring patterns.
2 Valid Select a ring pattern for automatic answering.
1: A Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring patterns, except the type C
described above.
037 RCV TO
MEMORY
(-----) Enter 8 digits password used to print out the received
document in memory by using Function 8-5 (RCV TO
MEMORY). When Function 8-5 is set to ON, this
parameter will not be shown on the LCD display. If you
wish to change the password, Function 8-5 is set to OFF
first.
038 ACCESS CODE (-----) Enter 8 digits Access Code to secure the machine from
unauthorized use.
039 PIN CODE
ACCESS
*1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3Prefix
043 PASSWORD-
XMT
(----) Setting a 4-digit XMT-Password and selecting whether
the machine performs and checks the XMT-Password of
the receiving station when transmitting.
044 PASSWORD-
RCV
(----) Setting a 4-digit RCV-Password and selecting whether
the machine performs and checks the RCV-Password of
the transmitting station when receiving.
046 SELECT RCV *1 Invalid Selecting whether the machine performs selective
reception.
2 Valid
052 DIAG.
PASSWORD
(----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
053 SUB-ADDRESS
PSWD
(-----) Setting a password (up to 20 digits) for secured sub-
address communication.
054 FAX FORWARD *1 Invalid Selecting whether the machine performs Fax Forwarding
to the specified destination.
2 Valid
056 COVER SHEET *1 Off Setting the home position of the Cover Sheet parameter
in the Select Mode.
2On
058 LANGUAGE *1 A-ENGLISH Selects the default message language for the display.
2 C-FRENCH
3SPANISH
065 PRINT
COLLATION
1 Invalid Selecting whether the machine prints out documents in
sequence.
*2 Valid
077 DEPARTMENT
CODE
*1 Invalid Selecting whether the machine performs the Department
Code operation.
2 Valid
No. Parameter
Setting
Number
Setting Comments