25
Using the Unit
Note:
L Speak clearly about 50 cm (20 inches) away from the microphone.
L While the display is on, you can press {BRIGHT} repeatedly to select the desired
brightness. If a power failure occurs, the brightness setting will be reset.
L If you do not answer a door call within 30 seconds, the display will turn off. If you press
{TALK} again, the display will turn on again, and you can talk to the visitor.
L The conversation will be automatically disconnected in about 1 minute and 30 seconds
(about 1 minute in {HOLD} mode). To resume the conversation, press {TALK}.
L At night or when there is not enough lighting in the doorway, the display will be shown in
black and white.
GM201A.book Page 25 Monday, April 4, 2005 5:10 PM
To Next Page
Loading...
