5.1 Function settings list
You can change the settings to match how the main monitor is used.
1 ® select the desired item ® .
R Repeat this step as necessary to navigate to the desired setting.
2 Select the desired setting if necessary ® .
3 When finished, press M
N.
Note:
R If you do not perform any operations for 90 seconds while changing these settings, or if an incoming call is received,
the setting is cancelled and the screen turns off.
R In the following table, default settings are indicated by < >.
R While changing settings, the currently selected item is highlighted.
Item name: “TIME AND DATE SETTINGS”
Item Settings
TIME AND DATE SETTINGS
*1
2016/1/1 0:00
*1 When using the product for the first time, follow the on-screen instructions to configure this setting (page 6).
Item name: “RINGTONE SETTINGS”
Sub-menu
Settings
1 2
RING VOLUME
–
<LOUD>
NORMAL
QUIET
MUTE
RINGTONE
LOBBY STATION
<SOUND 1>
SOUND 1 (REPEAT)
SOUND 2
SOUND 2 (REPEAT)
SOUND 3
SOUND 3 (REPEAT)
DOOR BELL SOUND 1
SOUND 1 (REPEAT)
<SOUND 2>
SOUND 2 (REPEAT)
SOUND 3
SOUND 3 (REPEAT)
Item name: “DELETE ALL IMAGES”
Item Settings
DELETE ALL IMAGES
DELETE ALL IMAGES
<BACK>
11
5. . Additional functions
5. Additional functions
To Next Page
Loading...
Need help?
General
