Panasonic VL-MV26 - Lobby Station Controls;Operations; Controls; Calling a Resident

The following provides an explanation of the controls and operations for the lobby station.
6.1 Controls
6.1.1 Lobby station
G
H
I
J
K
A
C
B
D
E
F
A Heat sensor
Turns on the display when a visitor is detected.
B Lens cover
C Light
Illuminates subjects in dark environments.
D Display
E Keypad
F Speaker
G Camera lens
H Microphone
I
Search buttons (
and )
Used to select items shown on the display.
J
Cancel button (
)
K
Call button ( )
6.2 Operations
6.2.1 Calling a resident
Entering a room number
1. Enter the resident’s room number.
2. Press M
N to call.
Searching by first letter of the name
1. Press M
N.
2. Use the keypad to enter the first letter of the resident’s name.
R Press a key repeatedly to scroll through the letters assigned to that key.
R Note the hints displayed at the bottom of the screen.
3. Press M N or M N to search for the desired name.
4. Press M N to call.
Searching through all names
1. Press M
N.
2. Press M N or M N to search for the desired name.
3. Press M
N to call.
Switching the image displayed on the main monitor
While talking to the main monitor, press M#N to switch the image displayed on the main monitor from the lobby station
to the camera. To return to the lobby image, press M
N.
13
6. . Lobby station controls/operations
6. Lobby station controls/operations