How to reset the Panasonic VL-MV26 when it's not working properly?
If the Panasonic Intercom System isn't working correctly, try pressing the MRESETN button on the bottom side of the main monitor using a pointed object. Note that recorded images and configured settings will not be affected.
What to do if my Panasonic Intercom System main monitor doesn't work?
If your Panasonic Intercom System's main monitor isn't displaying anything, the ringtone isn't sounding, and voices can't be heard, and the power is on, it could indicate an issue with the electrical wiring. In this case, it's best to contact an authorized service center for assistance.
Why are the images on my Panasonic VL-MV26 dirty or unclear?
If images on your Panasonic Intercom System appear dirty or unclear, it might be due to dirt or condensation on the lobby station's lens. Try wiping the lens with a soft, dry cloth. If there's water condensation, wait for it to evaporate.
Why doesn't the ringtone sound on my Panasonic VL-MV26 lobby station?
If the ringtone for the lobby station on your Panasonic Intercom System isn't sounding, the ringtone volume may be muted. Try to activate the sound for the ringtone.
Why are people's faces dark on my Panasonic VL-MV26 Intercom System images?
If the images of people's faces appear dark on your Panasonic Intercom System, especially when there's strong sunlight or backlight around the lobby station, use the backlight compensation function.
Why are there white lines on my Panasonic Intercom System display?
If images on your Panasonic Intercom System are white, or show white lines or circles, strong light, like sunlight, might be shining into the lobby station's lens. To resolve this, try moving the lobby station away from direct sunlight or adjusting its angle.
How to fix white or black images on my Panasonic VL-MV26?
If the images on your Panasonic Intercom System are white or black, it could be due to the display brightness not being correctly adjusted. Adjust the brightness while images are displayed.
Why are night images dark on my Panasonic VL-MV26?
If images at night on your Panasonic Intercom System are dark and faces are hard to identify, even with the lobby station's LED lights on, it's because the LED light cannot illuminate the edges of the visible area. It's recommended to install extra lights around the lobby station.
Why is my Panasonic Intercom System image in black and white?
If the image of the subject is displayed in black and white (or bluish-purple) on your Panasonic Intercom System, it may be because it is night or there is poor lighting around the lobby station. Turn on the LED lights when it is dark.
General| Brand | Panasonic |
|---|---|
| Model | VL-MV26 |
| Category | Intercom System |
| Language | English |
To Next Page
