EasyManua.ls Logo

Panasonic VL-MWD501 - 1-2. System Overview

Panasonic VL-MWD501
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Registering the product to the
Video Intercom System
The operations described here are based on the
VL-SWD501 series main monitor. See the Operating
Instructions of the Video Intercom System for more
information.
1 : From the top menu, touch ®
® [Register/Cancel] ® [Register] ® [Sub
monitor station] ® select the number of the sub
monitor to be registered.
R After this, use the sub monitor and complete the
following steps within about 2 minutes.
2
*1
: When "Please register the device." is displayed
on the sub monitor screen, press
( ) ®
(Yes).
R "Registering completed" is displayed.
3 : Press .
*1 To re-register cancelled sub monitors:
( ) ® : "Register" ®
( ) ® (Yes)
Cleaning
Wipe the product with a soft, dry cloth.
For excessive dirt, wipe the product with a slightly damp
cloth.
Cleaning the charger:
For safety, disconnect the charger from the power supply
before cleaning.
Cleaning the sub monitor:
To avoid mistakenly operating the sub monitor, remove
its batteries before cleaning.
Specifications
Main body
Power source
Rechargeable nickel metal
hydride (Ni-MH) battery
Dimensions
(mm) (height ´
width ´ depth)
Approx. 173´52´30
(excluding protruding sections)
Mass (weight) Approx. 160 g (including the
batteries)
Operating
environment
Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 2.2 inches, colour
display
Frequency
range
1.88 GHz to 1.90 GHz
Talking method Hands-free
Operating time
*1
Standby use: approx. 80 hours
Charging time
*2
Approx. 8 hours
*3
Transmitting
range
Approx. 100 m (line-of-sight
distance from the main monitor)
*1 When used fully charged in an operating
temperature of 20 °C.
*2 When the operating temperature is 20 °C. The
charging time may increase when the operating
temperature is lower than this.
*3 When registered to the main monitor.
Charger
Power source
AC adaptor (PNLV226CE)
Input: 100-240 V AC, 0.1 A,
50/60 Hz
Output: 5.5 V DC, 0.5 A
Power
consumption
Standby: approx. 0.4 W
(when the sub monitor is not
placed in the charger)
During charging: approx. 1.4 W
Dimensions
(mm) (height ´
width ´ depth)
Approx. 43´81´76
(excluding protruding sections)
Mass (weight) Approx. 70 g (excluding the AC
adaptor)
Operating
environment
Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Note:
R Design and specifications are subject to change
without notice.
R The software of this product is based in part on the
work of the Independent JPEG Group.
R Names, company names, product names, software
names, and logos mentioned in this manual are
trademarks or registered trademarks of the
companies concerned.
6

Other manuals for Panasonic VL-MWD501

Related product manuals