To Next PageTo Next PageWhy can't I see people properly on my Panasonic VL-SWD501EX Intercom System?
You may not be able to correctly view people with the camera in your Panasonic Intercom System in the following cases: when people are moving near the edge of the sensor range, when people move slowly or quickly across the front of the camera, or when people move closely across the front of the camera (approx. 1 m).
What to do if my Panasonic VL-SWD501EX Intercom System is not working properly?
If your Panasonic Intercom System isn't working correctly, try pressing the RESET button on the bottom of the main monitor with a pointed object. Also, try removing and reinserting the battery.
Why is the heat sensor not working on my Panasonic VL-SWD501EX Intercom System?
If the heat sensor on your Panasonic Intercom System is having trouble making detections, the surface of the heat sensor might be dirty. Try wiping it with a soft, dry cloth.
Why are objects blurred in my Panasonic Intercom System images?
If objects in images are blurred on your Panasonic Intercom System, it may be because the subject is moving. Installing extra lights in the area around the camera is recommended.
How to fix dirty or unclear images on my Panasonic Intercom System?
If the images from your Panasonic Intercom System appear dirty or unclear, it might be due to dirt or water condensation on the doorphone's lens. Try wiping the lens with a soft, dry cloth. If there's condensation, wait for it to evaporate.
Why aren't the sensors working on my Panasonic VL-SWD501EX Intercom System?
If the sensors on your Panasonic Intercom System aren't detecting anything, check the system's settings. Also, motion detection won't work at night if it's set to 'Day only'. Check the settings. Detections may not be made when the object makes small movements, so change the 'Motion detection sensitivity' setting to a higher sensitivity. Detections are hard to make when it is dark, so use the heat sensor for detections or install lights to illuminate the area around the object.
Why is the touch panel not responding on my Panasonic Intercom System?
If the touch panel on your Panasonic Intercom System's main monitor isn't responding, the touch panel might be dirty. Try cleaning it.
Why is the brightness wrong on my Panasonic VL-SWD501EX Intercom System images?
If the images on your Panasonic Intercom System aren't displayed with the correct brightness, it could be due to rapidly changing brightness in the camera's area. Wait about 1 second for the brightness to adjust automatically.
What does it mean when my Panasonic VL-SWD501EX Intercom System flashes and beeps?
If your Panasonic Intercom System flashes and emits 2 short beeps, the battery level is very low. Charge the batteries immediately.
How to brighten faces on Panasonic VL-SWD501EX Intercom System images?
If the images of people's faces appear dark on your Panasonic Intercom System, try using the backlight compensation function.
General| Type | Video Intercom System |
|---|---|
| Monitor Type | LCD |
| Wireless Handset | Yes |
| Expandable Wireless Handsets | Up to 6 |
| Door Station Camera | Yes |
| Picture Recording | Yes |
| SD Card Recording | Yes |
| Night Vision | Yes |
| Electric Lock Release Support | Yes |
| Intercom Call | Yes |
| Power Source (Main Monitor) | AC Adapter |
| Wireless Standard | DECT |
| Camera Sensor | CMOS |
| Audio | Two-way |
| Screen Size | 5 inches |
| Operating Temperature | -10°C to +50°C |
| Power Supply | AC 100-240V, 50/60Hz |
| Weather Resistance | IP44 (Door Station) |
Critical safety warnings to prevent severe injury, fire, and electric shock.
Essential safety precautions for product usage, including water and electrical safety.
Details on using SD cards for recording images and calls, including cautions.
Instructions on how to answer incoming calls from the doorphone.
Information on recording capacity for SD cards and internal memory.
Information on connecting and registering a camera to the system.
How to adjust sensor, screen, and sound settings for the camera.
How to connect and configure electric locks for door/gate access.
Steps to set up electric locks, including unlocking time and buzzer sound.
How to operate electric locks from the main or sub monitor.
Describes how the main monitor handles multiple simultaneous incoming calls.
Describes how the sub monitor handles multiple simultaneous incoming calls.
Steps to register additional sub monitors to the main unit.
Managing SD cards, including formatting, copying data, and playing images.
Troubleshooting common issues with doorphone image display.
Troubleshooting common issues with camera image display.
Troubleshooting sound issues like cutting out or feedback during calls.
Troubleshooting issues related to charging the sub monitor.
Troubleshooting problems with camera sensor detection not working.
Explains error messages that may appear on the main monitor.
Explains error messages that may appear on the sub monitor.
