3
Getting To Know
Your Machine
The following Symbols/Icons are used throughout this operating instructions manual.
Place original(s) on the ADF
Place original(s) on the Platen
(Book)
Input text with a QWERTY
Keyboard
Input numbers
● Number of Copies, etc.
Go to next step
Go to next step (below)
When making copies
Getting to know your machine
Others
(Index)
Press Hard Key
Touch any Button
Symbols/Icons
Place original(s) on the Platen
(Sheet)
Press any Hard Key on the control
panel, or touch any Button on the
touch panel display
5
When setting the machine's
function parameters
To Next Page
Loading...
