34
Making Copies
2-Sided/Original Copy
Special originals (like thin paper, etc.) can be fed
from the ADF Tray and copied continuously using
the Job Build and SADF Mode.
If the Job Build and SADF buttons are not shown
on the Touch Panel display, the Job Build and
SADF Modes must be enabled in the copier
function settings. Please consult with the Key
Operator. (See page 80)
1
5
Place one Original
at a time or up to 85
sheets (20 lb)/Letter
70 sheets (Ledger/
Legal/Invoice)
2
Reduction/
Enlargement
only
Place the next original within 5 sec. of
last ejected copy.
If 5 sec. is passed, "Another Original?
YES or NO" message will be displayed.
Select "YES" button to continue copy
job.
Example: To make 5 sets of sorted copies of
100 sheets of originals. (Letter size)
85
100
1
86
100
1
Originals: 85 sheets
<1st scan>
Originals: Remaining 15 sheets
<2nd scan>
1
st
and 2
nd
Scanned Data
are combined into one job.
5 sets of 100 sheets
sorted copies are printed
1
5
2
Place the first 85 sheets
of originals on the ADF
Tra y.
Place the next original within 5 sec. of
last ejected copy.
(15 sheets)
If 5 sec. is passed, "Another Original?
YES or NO" message will be displayed.
Select "YES" button to continue copy
job.
■■
■■
■ Job Build and SADF Mode
To Next Page
Loading...
Need help?
General
