12
Making Copies
Basic Menu
■■
■■
■ Parameter Registration (Tandem User Parameter)
Requires network setup (see pages 77-78).
The selected Remote printing copier must be either
DP-8060/8045/8035.
For the copier to function as a Remote/Tandem
Copier it has to be setup in advance.
Parameter Registration needs to be carried out in
the following procedure;
Step1: Register the other machine's name in the
Tandem User Parameter.
Step2: Register the other machine's IP address in
the Tandem Destination.
Input the Key Operator Password if required.
● The default value for the password is 8 digits
(00000000).
Ask the Key Operator if this has been changed.
1
4
Input Password
(8 digits: alpha-
numerical; alphabet
(case-sensitive),
numbers, symbols
(@, ., _, and SPACE))
7
Enter the key name
∗
(up to 15 characters).
∗
By default, the key
name will be up to
15 characters of
the station’s name.
To Next Page
Loading...
Need help?
General
