14
Making Copies
Basic Menu
■■
■■
■ Parameter Registration (Tandem Destination)
Requires network setup (see pages 77-78).
The selected Remote printing copier must be either
DP-8060/8045/8035.
For the copier to function as a Remote/Tandem
Copier it has to be setup in advance.
If installing the machine on a Network with a different
subnet mask, you must first register it before being
able to use the Tandem/Remote Copying function.
Prior to the following setting, network set work (see
pages 77-78)
and Parameter registration (see pages 12-15) are
required.
1
4
Input Password
(8 digits: alpha-numerical;
alphabet (case-sensitive),
numbers, symbols
(@, ., _, and SPACE))
7
Machine name
(up to 15 characters)
To Next Page
Loading...
