19
Connection
Caution:
Before starting connection, make sure that the circuit breaker is switched off. Failure to do so could result in fire,
injury, electric shock or property destruction.
To a plug-in power type microphone
To an external powered speaker
Microphone input cable (white)
Audio output cable (black)
(BNC)
*1: The grounding wire should be connected to ground.
Ethernet cable connector
TX+
TX+
RX+
RX-
Red
Orange
Yellow
Green
Data transmission
Data reception
q
w
e
r
t
y
u
i
Coaxial cable
Network cable
To the monitor used
for adjustment
8P alarm cable (provided)
To a sensor
To a hub, PC, etc.
Ethernet cable
RJ45 conversion connector (provided)
Output cable for
adjustment-specific monitor
External I/O
cables
To an outlet
(24 V AC, 50 Hz)
for WV-NW964
Grounding wire *
1
Power cable
24 V AC cable for camera
External I/O cable connector
ALARM IN2/ALARM OUT (red) (EXT I/O 2)
ALARM IN1/BW IN (black) (EXT I/O 1)
GND (brown)
ALARM IN3/AUX OUT (Yellow) (EXT I/O 3)
Unused (blue)
GND (orange)
GND (light blue or green)
GND (purple)
To an outlet (220 V to 240 V AC, 50 Hz) for WV-NW960
To Next Page
Loading...
