Select an action to be taken when a terminal alarm 2 is detected from the following.
• Off: Does not take any action even when a terminal alarm 2 is detected.
• 1-64
: When the registered
preset position is selected, the camera will move to the selected preset position when a terminal alarm 2
is detected.
• Auto track
: When a terminal alarm 2 is detected, the camera will start the auto tracking.
• 1-256
: If a previously registered preset position is selected, when a terminal alarm 2 is
detected, the camera will move to that position.
• Auto track
: When a terminal alarm 2 is detected, the camera will start the auto tracking.
• Patrol 2
: When a terminal alarm 2 is detected, the camera will start the patrol.
* If Patrol 2 is not registered it is not displayed on the screen.
• Default: Off
[Terminal alarm 3]
Select an action to be taken when a terminal alarm 3 is detected from the following.
• Off: Does not take any action even when a terminal alarm 3 is detected.
• 1-64
: When the registered
preset position is selected, the camera will move to the selected preset position when a terminal alarm 3
is detected.
• Auto track
: When a terminal alarm 3 is detected, the camera will start the auto tracking.
• 1-256
: If a previously registered preset position is selected, when a terminal alarm 3 is
detected, the camera will move to that position.
• Auto track
: When a terminal alarm 3 is detected, the camera will start the auto tracking.
• Patrol 3
: When a terminal alarm 3 is detected, the camera will start the patrol.
* If Patrol 3 is not registered it is not displayed on the screen.
• Default: Off
[VMD alarm]
Select an action to be taken when a VMD alarm is detected from the following.
• Off: Does not take any action even when a VMD alarm is detected.
• 1-64
: When the registered
preset position is selected, the camera will move to the selected preset position when a VMD alarm is
detected.
• Auto track
: When a VMD alarm is detected, the camera will start the auto tracking.
• 1-256
: If a previously registered preset position is selected, when a terminal alarm 1 is
detected, the camera will move to that position.
• Auto track
: When a VMD alarm is detected, the camera will start the auto tracking.
• Patrol 1
: When a VMD alarm is detected, the camera will start the patrol.
* If Patrol 1 is not registered it is not displayed on the screen.
• Default: Off
[Command alarm]
Select an action to be taken when a command alarm is detected from the following.
• Off: Does not take any action even when a command alarm is detected.
• 1-64
: When the registered
preset position is selected, the camera will move to the selected preset position when a command alarm
is detected.
• Auto track
: When a command alarm is detected, the camera will start the auto tracking.
• 1-256
: If a previously registered preset position is selected, when a terminal alarm 1 is
detected, the camera will move to that position.
• Auto track
: When a command alarm is detected, the camera will start the auto tracking.
• Patrol 1
: When a command alarm is detected, the camera will start the patrol.
Operating Instructions 137
13 Configure the alarm settings [Alarm]
To Next Page
Loading...
