Panasonic WV-SC385PJ - Page 15

– When there are multiple moving objects in the shooting area
– When the contrast ratio between a moving object and the background is almost none
– When an object moves quickly
– When a moving object is too small or too big
– When the shooting area is dark
– When there is a flicker in the shooting area
• When the zoom ratio is set to the “Tele” side, it may be difficult to obtain accuracy with the auto
tracking function. It is recommended to use the auto tracking function with setting the zoom ratio
to the “Wide” side.
• Auto track
SW396
SW396
SC386
SC386
: Automatically tracks objects in the shooting area.
Note
• With the Auto track feature, objects moving in the screen are picked out and automatically
tracked.
• In the following situations, targets may not be able to be tracked, or false detections may occur.
– when there is little contrast between the subject and the background
– when the dome is dirty or wet
– when there are large changes to the lighting intensity
– when there are many moving objects other than the subject
– when there is a change to the axis of the camera’s lens
– when the subject moves directly underneath the camera
– when there is harsh flickering
– when there are reflections from light entering the dome due to reflections from a window
or road, or from a backlight
– when the target is hidden behind a utility pole or other objects
– when the subject passes by other moving objects
– when the target moves too fast or too slow
– when the camera is shaking
• When the zoom ratio is set to the “Tele” side, it may be difficult to obtain accuracy with the auto
tracking function. It is recommended to use the auto tracking function with setting the zoom
ratio to the “Wide” side.
• Auto pan
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
: Automatically pans between the start
position and the end position set in advance (®page 117).
Even when the camera is operated for zooming or focusing, the camera continues panning.
(However, panning will stop when the zoom button (x1) is clicked.)
• Preset sequence
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
: Automatically moves to the preset
positions (®page 113) orderly (start from the lowest preset position number).
• 360 map-shot
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
: Moves 45° horizontally at a time and
repeats 8 times to shoot images of each 45° position (45° x 8 = 360°), and then displays 8 thumbnail
images of each 45° position (45° x 8 = 360°) on a newly opened window. When a thumbnail image is
clicked, the camera moves to the respective position and live images will be displayed on the “Live”
page.
• Preset map-shot: Eight thumbnail images of the preset position 1-8 (®page 113) will be displayed
orderly on a newly displayed window. When a thumbnail image is clicked, the camera moves to the
respective position and live images will be displayed on the “Live” page.
Note
• Do not operate the browser until all the thumbnail images are displayed and the camera returns to
the original position (where the camera was when “360 map-shot” or “Preset map-shot” was carried
out).
Operating Instructions 15
1 Monitor images on a PC