Note
• Schedule saving is available only when “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected for
“Recording format”.
FTP error
The settings related to the directory name of the PC that recorded images of when FTP errors occur will be
downloaded to can be performed.
Designate the destination folder in the same manner as for “Alarm”.
IMPORTANT
• When “Name w/o time&date” is selected for “File name” of “FTP periodic image transmission”on the
[Advanced] tab on the “Network” page, FTP error log and associated images will not be saved. To save
them, select “Name w/time&date”. (®page 147)
Note
• When “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected for “Recording format”, “FTP
error” is unavailable.
[Permission level of viewing logs]
Level of the user to display and operate the “Log” in the live image page can be set.
• 1. Level 1 only: Only the level 1 user can view and operate the “Log”.
• 2. Level 2 or higher: Level 1 and Level 2 users can view and operate the “Log”.
• 3. All users: All users can view and operate the “Log”.
However, deleting of the log can be operated by the Level 1 and Level 2 users. The viewing of folders in the
SD memory card can be operated by the Level 1 users.
Default: 1. Level 1 only
72 Operating Instructions
10 Configure the basic settings of the camera [Basic]
To Next Page
Loading...
