What to do if Panasonic WV-SP508 Security Camera power is not turned on?
If the Panasonic Security Camera's power is not turning on, verify that the connection is properly established. Also, check the AC adapter specifications and refer to the operating instructions of the PoE device in use.
General| Sensor Type | MOS |
|---|---|
| Digital Zoom | Up to 4x |
| Frame Rate | Up to 30 fps |
| Audio Compression | G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps |
| Power Source | PoE (IEEE802.3af compliant) |
| Ingress Protection | IP66 |
| Vandal Resistance | IK10 |
| Resolution | 1920 x 1080 pixels |
| Lens Type | Varifocal lens |
| Field of View | Horizontal: 96.4° (Wide) - 29.1° (Tele) |
| Day/Night Function | Yes |
| Wide Dynamic Range (WDR) | Yes |
| Video Compression | H.264, JPEG |
| Ethernet | 10Base-T / 100Base-TX |
| Operating Temperature | -10 °C ~ +50 °C {14 °F ~ 122 °F} |
To Next Page
