IMPORTANT
• When the settings are being configured on the setup menu, sometimes the VMD function may not work
correctly.
[Area]
When selecting a VMD area in the screen, it will be numbered as area 1. (Subsequent areas will be numbered
in the order of selection.)
[All areas] button
When the [All areas] button is clicked, the whole area will become the VMD area, and “1(White)” will be
automatically applied to “Area”.
[Status]
Select “On” or “Off” to determine whether or not to activate each VMD area.
• On: Activates the respective VMD area.
• Off: Inactivates the respective VMD area.
• Default: Off
Operating Instructions 145
13 Configure the alarm settings [Alarm]
To Next Page
Loading...
