PANAFLEX MILLENNIUM
5.4 Pitch and stroke adjustment
To ensure quiet running, adjust the pitch
adjustment by running the camera at speed and
rotate the pitch control knob clockwise or
counter-clockwise until the perforation noise is
minimized. This adjustment should be made at
every reload.
The stroke adjustment is made utilizing a
special tool and is generally preset at time of
rental. This adjustment is made in order to
optimize the amount of film which is pulled
down each time ensuring clean entry of regis-
tration pins. The stroke adjustment is made
while the camera is running. However, in order
to minimize the possibility of damage, it is
advisable to only insert or remove the tool
while the camera is off.
camera operation
To Next Page
Loading...
