PANAFLEX MILLENNIUM chapter title
7.3 Operator side panel and controls
To Turn Camera On/Off:
(from rear or side switch)
■
Push on/off switch to the right to turn on the
camera. The switch returns to a center position.
■
Push on/off switch to the left to turn the cam-
era off. The switch returns to a center position.
STATUS INDICATORS:
Low/Out/Jam: indicates status of film in the
camera. Low indicator will illuminate with
approximately 20' of film remaining. The out
indicator illuminates within 5'.
Low Batt: indicates low battery voltage (21
volts) requiring a battery change.
FPS: indicates an error in camera running
speed (out of sync).
Mode: scrolls through displays appearing in the
digital display.
displays & controls
To Next Page
Loading...
