Two-way remote is the main mean to control the system.
For easily distinguishable notifications the remote uses 16 ringtones. Each ringtone matches
particular event.
Remote has flashing LED indicators for additional information. Brightness of displayed information
can be adjusted automatically by built-in light sensor.
The remote is fully operational when shipped. To switch the remote on, press and hold
button for 3 seconds. «
» ringtone will play. Pressing and holding this button again for 3
seconds will cause the remote to switch off.
WARNING!
ALL CONTROL COMMANDS ARE TRANSMITTED VIA RADIO CHANNEL, FOR MAXI
MUM EFFECTIVENESS AND RANGE IT IS RECOMMENDED NOT TO SHIELD AERIAL
AREA SEE PICTURE WITH FINGERS WHEN USING A REMOTE.
Button 4
Sound emitter
Send
indicator
Alarm
indicator
Ambient light sensor
Lock
indicator
Unlock
indicator
Button 1 Button 3Button 2
Button 5
Button 6
SOS
button
To Next Page
Loading...
