Checking the number of recorded remotes
Number of recorded remotes and radio tags can be checked every time the ignition is switched on
when disarmed. Number of orange and green LED flashes will indicate number of remotes and tags
recorded correspondingly.
Number of recorded remotes and radio tags can also be checked by taking off and putting back
on battery terminal. The system will sound a set of signals, corresponding to the number of recorded
remotes.
Charging the remote
LCD remote works on accumulator battery that should be charged from time to time via micro-USB
cable. Period of operation without recharging depends on conditions and operation rate. On average,
one full charge should last 20-30 days.
Micro-USB port
for charging and
software updates
To Next Page
Loading...
