Pantum BM5100 Series User Manual

55
2) Please tick “No” to configure other wireless network needed to connect to. Complete
configuration according to interface prompt.
Note:
• The display password is not ticked by default; if it is ticked, all passwords input can be
seen in clear text.
2.2 The computer is not connected to wireless network.
Input the SSID (case sensitive) and password of access point (wireless router) in the interface
below. Complete configuration according to interface prompt.
Note:
• If you do not know the SSID of access point (wireless router), please click “Print Wireless
Network Information Page” to view the SSID of the needed access point (wireless router).
• If the printer cannot be used normally after wireless network setup is finished, please
install the drive again. Please select “wireless network connection ” as the installation
method .

Pantum BM5100 Series Specifications

General

Print Technology	Monochrome Laser
Processor	600 MHz
Memory	512 MB
Operating Systems Compatibility	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	6.9 seconds
Duplex Printing	Automatic
Connectivity	USB, Ethernet
Paper Input Capacity	250 sheets
Output Capacity	150 sheets
Media Types	Plain, Thick, Thin, Cardstock, Label
Media Sizes	A4, A5, A6, B5, Letter, Legal, Executive
Media Weight	60 to 163 g/m²