Pantum BM5100 Series User Manual

69
Note：
• Windows 7 is taken as example in the above description.
• You can realize poster printing feature by selecting 2x2 poster printing in multipage.
• You can enable Printing Preferences and click the Help button to view detailed
function description.Please refer to “Open Help Document” for the method to open help
document.
7.2. Printing method
When printing, you can specify the tray to print as needed. The operating steps are as follows:
1. Open the file to be printed, click the “File” menu in the upper left corner, and select “Print” to
enable the print driver.
2. Select printer of the corresponding model.
3. Click “Printer Properties/Preferences” to configure printing.
4. Enter the “Paper” options interface, you can set “paper size and type”, “paper source and
orientation” as needed.
5. Click “OK” to finish printing setup.
Note：
• If the printer control panel sets the paper size/type to “Auto”, print job will be done by
the “paper size/type” as set by the driver.To obtain better print effect, please load the
paper media matching your settings for the corresponding tray.
7.2.1. Paper size and type
For more information, see the “Paper and Print Media” section in this Manual.

Pantum BM5100 Series Specifications

General

Print Technology	Monochrome Laser
Processor	600 MHz
Memory	512 MB
Operating Systems Compatibility	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	6.9 seconds
Duplex Printing	Automatic
Connectivity	USB, Ethernet
Paper Input Capacity	250 sheets
Output Capacity	150 sheets
Media Types	Plain, Thick, Thin, Cardstock, Label
Media Sizes	A4, A5, A6, B5, Letter, Legal, Executive
Media Weight	60 to 163 g/m²