Pantum BM5100FDW Series User Manual

77
7.3.3. Fine mode printing
The Fine mode is applicable to engineering drawings and fine lines printing.
Set up fine mode in the basic page of printer preference After setup, fine printing mode can be
realized.
7.3.4. Booklet printing
Note:
• "Booklet" cannot be concurrently used with "Multipage" or "Zooming".
• To enable the Booklet function, please also check "collated".
• To start a Booklet, please select any of the following paper types: A4, Letter, Legal, Oficio
or Folio.
• Since Booklet always goes with duplex printing, when it is selected, "Deplux" will be
checked authomatically and cannot be unchecked.
1. Open the file to be printed, click the “File” menu in the upper left corner, and select “Print” to
enable the print driver.
2. Select the appropriate model of printer.
3. Click “Printer Properties/Preferences” and configure printing.
4. Enter the “Layout” option interface and check “Booklet”.
Note:
• For other settings of booklet printing, click “Booklet Settings…”, complete print settings in
the “Booklet Settings” interface as needed, and then click “OK”.

Pantum BM5100FDW Series Specifications

General

Print Technology	Laser
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet, Wi-Fi
Max. Monthly Duty Cycle	80, 000 pages
Output Capacity	150 sheets
ADF Capacity	50 sheets
Fax Function	Yes
Memory	512 MB
Functions	Print, copy, scan, fax
Operating System Compatibility	Windows, macOS, Linux
Print Speed	40 ppm
Print Resolution	1200 x 1200 dpi
Mobile Printing	AirPrint, Mopria, Pantum App
Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 1200 dpi
Copy Speed	40 cpm
Media Types Supported	Plain paper, envelopes, labels
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal