Pantum M6550NW Plus Series User Manual

111
14.2. Software Failure
Problem
Solution
The printer icon does not appear in the
"Devices and Printers" folder.
Reinstall the printer driver. Ensure that the USB interface
cable and the
The printer is in Ready mode but it will
not perform any print job.
If the failure still exists after restarting the Make sure the
network cable of USB cable is connected correctly.
Failed to install the driver
Check whether the print spooler service is enabled.
Check the power supply and the connection of the printer.
The driver cannot be used if the IP
address of the printer has been changed
Modify the port IP address of the printer driver.
If the above method does not work, please reinstall the
printer driver.
It is recommended that a fixed IP address should be set to
the network printer.
In the DHCP network, it is recommended to bind the IP
address with the MAC address of the printer.

Pantum M6550NW Plus Series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan
Output Capacity	100 sheets
Display	LCD
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Copy Resolution	600 x 600 dpi
Maximum Copy Pages	99 pages
Media Weight	60-163 g/m²
Mobile Printing	Pantum App, AirPrint, Mopria
Operating Systems	Windows, macOS, Linux
Print Speed	22 ppm
Connectivity	USB 2.0, Ethernet, Wi-Fi
Monthly Duty Cycle	20, 000 pages
Input Capacity	150 sheets
Print Speed (Black)	22 ppm
First Print Out Time	Less than 7.8s
Copy Speed	22 cpm
Scanner Type	Flatbed
Scan Resolution (Optical)	1200 x 1200 dpi
Media Sizes	A4, A5, A6, B5
Paper Capacity	150 sheets