ParaBody 660 - Top Boom and Weight Stack Setup

12
FIGURE 8
STEP 8
• LOOSELY assemble one 4-1/2” PULLEY (43) to the TOP BOOM (17) using one 3/8 X 2-3/4” BOLT (85), two 3/8” FLANGE SPACERS
(49), and one 3/8” LOCK NUT (92). See FIGURE 8.
85 3/8 X 2-3/4”
17
49
92
49
43
FIGURE 7
STEP 7
• LOOSELY assemble the PRESS BASE (18) to the REAR (4) & MIDDLE UPRIGHTS (8) using two 1/2 X 3” BOLTS (87), two 1/2”
WASHERS (93), and two 1/2” LOCK NUTS (94). See FIGURE 7.
1
1/2 X 3” 87
18
94
93
8
4