ParaBody 660 - Page 17

17
STEP 15
• LOOSELY assemble the TOP BOOM (17) to the top of the REAR UPRIGHT (4) using two 1/2 X 4” BOLTS (88) two 1/2” WASHERS (93)
and one 1/2” LOCK NUT (94). See FIGURE 15.
FIGURE 15
• SECURELY assemble one 3/8” SPRING PIN ASSEMBLY (51) to the SPRING PIN HOUSING on the FRONT UPRIGHT (25) as shown in
FIGURE 15.
• Assemble one 3-PRONG KNOB (61) to the FRONT UPRIGHT (25) as shown in FIGURE 15.
• Assemble two ROLLER PADS (37) to the FRONT UPRIGHT (25) using one 3/4 OD X 16” TUBE (35) and two STARLOCK
COLLARS (50). See FIGURE 15.
37
17
50
51
1/2 X 4” 88
93
94
35
61
25
37
50
4
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2