ParaBody 950 st - Pec Dec Cable Assembly: Step 3; Attaching U-Bracket and Ab Crunch Cable

\ \
Step 3
A.
Securely assemble l,~he ’U’ bracket (~26) fo the threaded end of the ab crunch c~ble (106) using
two 1/4" washers ~80) and two 1/4" nylock nuts (B1). (Note: Position the ’U’ br’ackef in ~he middle
of the thread as shown and "lock’-nuts together.)
B. Securely assemble ~he pec dec cpble (104) agd .one 3-I/2" pulley (111) ~o the ’U’ bracket (26)
one 3/8 x 2" bolt (I00), lwo 3/8" washers (78), and ,one 378" nylock nut (83). (Note: Loop
cable around the pulley prior to inse~ing if into the ’U brackel.)