Need help?Do you have a question about the Paradigm T561 and is the answer not in the manual?
Guide on using the service manual and contacting customer support for assistance.
Details troubleshooting steps for MCB-related errors and issues on the treadmill.
Explains the console's display values, resolution, range, increments, and function keys.
Describes how to adjust speed and elevation, pause, end workouts, convert units, and use recovery features.
Details the quick start, speed interval, and elevation programs available on the console.
Explains target training and heart rate control programs for customized workouts.
Covers setup, diagnostic modes, unit conversion, and incline calibration procedures.
Procedures for replacing the running belt and deck, and adjusting belt tension and tracking.
Steps for replacing the motor drive belt and the main drive motor.
Guides for replacing the front roller, rear roller, and deck cushions.
Instructions for replacing the incline motor and motor controller, including calibration.
Procedures for replacing the moving wheels on the treadmill frame.
Overview of T560 console and motor controller PCBs, block diagrams, wiring, and part lists.
Overview of T561 console and motor controller PCBs, block diagrams, wiring, and part lists.
Exploded drawings and part lists for T560 treadmill (110V and 230V).
Exploded drawings and part lists for T561 treadmill (110V and 230V).
Schedule for preventive maintenance tasks on different treadmill assemblies.
Instructions for unpacking, assembling, and installing the treadmill safely.
Lists parts required for assembly and provides information for communicating by fax.
To Next Page
General
