Paradox MAGELLAN MG6250 User Manual

MG6250 Console • User Guide
12 | Chapter 2- Getting Started
Remote Controls at a Glance
The remotes shown in figure 5 are those which are available with your MG6250 alarm system. For detailed
information on each of these remotes, refer to the remote’s user documentation. Your installer can add other
functions and/or change the default settings of your remote controls. Your remote control has been
programmed with the following features by default.
Figure 5: Compatible Remote Controls
REM1/RAC1
REM2/RAC2
= Full arm
= Stay arm
= Sleep arm
= Disarm
REM3
REM15
= Full arm
= Disarm
= Stay arm
= Sleep arm
= Full arm
= Disarm
= Stay arm
= Sleep arm
= Request feedback from the Magellan
system
= Unlock remote
[ARM]
= Full arm
[SLP]= Sleep arm
[STAY]
= Stay arm
[OFF]= Disarm
REM101
= Emergency/ Panic

Paradox MAGELLAN MG6250 Specifications

General

Wireless Zones	64
Built-in Keypad	Yes
Built-in Siren	Yes
Remote Control	Yes
Partitions	2
PGMs	2
Memory	256 events
StayD Mode	Yes
RF Frequency	433MHz or 868MHz
Communication	GSM, PSTN
System Type	Wireless
Wireless Sirens	Yes
Battery Backup	Yes, rechargeable