Paradox MAGELLAN MG6250 User Manual

MG6250 Console • User Guide
16 | Chapter 3 - Arming and Disarming
Stay Arming
Stay arming will partially arm your system to permit you to remain in your home by arming the outer zones of
your system (e.g. doors and windows) and ignoring interior zones (e.g. motion detectors). All defined zones in
the system must be closed in order to stay arm the system.
To stay arm your system:
1. Press the
key.
2. Enter your user code (default: 1234). The LED will turn green, indicating that the system has been
STAY armed.
3. If you have access to both partitions: Press the key corresponding to the desired partition (1 or 2). For
both partitions, press the other key after the confirmation beep.
NOTE: The LCD screen will also display STAY in the top-right corner of the screen.

Paradox MAGELLAN MG6250 Specifications

General

Wireless Zones	64
Built-in Keypad	Yes
Built-in Siren	Yes
Remote Control	Yes
Partitions	2
PGMs	2
Memory	256 events
StayD Mode	Yes
RF Frequency	433MHz or 868MHz
Communication	GSM, PSTN
System Type	Wireless
Wireless Sirens	Yes
Battery Backup	Yes, rechargeable