Paradox MG5050+ User Manual

62
MG5050+ Programming Guide
Keypad Lockout
Use the following section to program keypad lockout settings for your MG5050+ control panel. Use worksheet 29 to record your settings.
NOTE: For EN 50131, the keypad lockout value must be set between three and ten attempts. The minimum delay to lock must be two minutes.
Dialer Options
Timers
Use worksheet 37 to record your settings for sections [820] to [840].
[715] ___/___/___ 000 to 255
Recycle alarm counter
(default: 000) [723] ___/___/___ 000 to 255 seconds
Panic shutdown**
(default: 010)
* For EN 50131, the maximum value is 45 seconds.
** For EN 50131, the section must be set to a minimum of 3 and a maximum of 10
Worksheet 54: Keypad Lockout
Section Data Description Default
[716] ___/___/___ 000 to 255 minutes Keypad lockout delay 015 minutes
[717] ___/___/___ 000 to 255 attempts before locking Keypad lockout counter 005 attempts
Table 58: Description of section [801]
Option Description OFF ON
Section [801]
1 Report system disarming

Always  After alarm
2 Report zone restore on closure

Bell cutoff  Zone closure
3 & 4 Auto-test report transmission  Disabled

Enabled
5Contact ID override  Disabled

Enabled
6 Future use
7 Future use
8 Future use
= Default
Worksheet 55: Communication Timers
Section Data Description Default
[820] ___/___/___ 000 to 255 hours Fail to comm. clear event timer 000 = disabled
[830] ___/___/___ 000 to 255 x 2 seconds TLM fail delay (landline only) 016
[831] ___/___/___ 000 to 032 Maximum dialing attempts monitoring station (landline only) 002
[832] ___/___/___ 000 to 127 seconds Delay between dialing attempts* (landline only) 020
[833] ___/___/___ 000 to 255 seconds Delay alarm transmission 000
[836] ___/___/___ 000 to 127 seconds Personal reporting delay* 005
[837] ___/___/___ 000 to 010 Personal reporting message repetition* 003
[838] ___/___/___ 000 to 255 seconds Recent closing delay 000
[839] ___/___/___ 000 to 255 minutes Power failure report delay** 015
[840] ___/___/___ 000 to 255 days Auto test report (see table 35 on page 41) 001
* Also applicable when using a VDMP3 Plug-in Voice Dialer.s
**The maximum value for power failure is 60 minutes.
Worksheet 53: System Timers
Section Data Description Section Data Description

Paradox MG5050+ Specifications

General

Partitions	2
PGMs	16
Wireless Zones	32
StayD Mode	Yes
Number of Zones	32
Wireless	Yes
Remote Control	Yes, via remote controls and app
Power Supply	16.5 V AC
Battery Backup	7Ah
Zones	32 (8 on-board)