Paradox PCS250G User Manual

Configuring the PCS250G Page 17
Note: When entering into GSM network provider sections, the LCD
screen of the control panel’s keypad will display either “Labels” or
“Messages”.
To configure your GSM network provider information via an SMS
command, enter the following SMS commands.
Important: SIM card 2 can only be programmed via SMS. The SMS
needs to be sent to SIM card 1 in order to program SIM card 2.
Note: When programming the second SIM card, replace APN1 with
APN2 and VAPN1 with VAPN2 in the SMS command. Refer to “List of
SMS Commands” on page 25 to view the commands for SIM card 2.
MG/SP/E EVO Feature
[921] [2960] APN part 1
(characters 1 - 16)
[922] [2961] APN part 2
(characters 17 - 32)
[923] [2962] APN user name part 1
[924] [2963] APN user name part 2
[925] [2964] APN password part 1
[926] [2965] APN password part 2
IMPORTANT: This information can be obtained from your GSM
network provider.
P[password].APN1.NAME.[Access
Point Name]
Used to program the SIM
card 1 Access Point Name
P[password].APN1.USER.[Access
Point Name]
Used to program the SIM
card 1 Access Point User
P[password].APN1.PSW.[Access
Point Name]
Used to program the SIM
card 1 Access Point
Password
P[password].APN1.CLEAR Used to clear the SIM
card 1 Access Point Name
P[password].VAPN1.[CALL BACK
PHONE NUMBER]
Used to view the SIM card 1
Access Point Name
information

Paradox PCS250G Specifications

General

Brand	Paradox
Model	PCS250G
Category	Cell Phone
Language	English