Page 16 Configuring the PCS250G
Programming Phone Numbers At The Panel
To program your PCS250G to forward all SMS coming in from a
specific number, simply add the letter "P" in front of the phone
number you program through the panel:
• You would program (P5145551234) to forward
• You would program (5145551234) to send text messages
Forwarding SMS Text Messages
To forward SMS text messages (received by your system) you
need to:
• Program the 1 telephone number that sends text
notifications to your system.
• Select “trouble” event group to forward SMS text messages.
• All messages from this phone number will automatically be
forwarded to the remaining phone numbers programmed to
receive text messages and select trouble event groups from
the system.
Receiving Text Messages
To receive text messages from your system you need to:
• Program the telephone numbers you wish to receive text
notifications.
• Select which event groups (alarm, arm/disarm, trouble and
trouble restore) will generate text messages.
• Select which partition the phone number is assigned to.
Configuring GSM Network Provider Information
To connect the PCS250G to the GPRS network, certain
registration parameters must be set (supplied by your GSM
network provider). These parameters include the Access Point
Name, APN User Name, and the APN Password. You can program
this information via your control panel or via an SMS command
(SIM card 2 can only programmed via an SMS command). To
begin the configuration of your GSM network provider
information via a control panel, enter the section programming
in your panel.
To Next Page
Loading...
Need help?
General
