Page 22 Configuring the PCS250G
Troubles
The following sections and options have been added to support
the IPPR512 GPRS/IP Monitoring Receiver.
Text message notification
In addition to reporting control panel events via a GSM cell
phone network through GPRS, the PCS250G can also send text
messages (SMS) to the end user (up to 16 cell phone numbers).
The PCS250G can send text messages for any control panel event
due to its proprietary communication through the panel’s serial
port. Each text message contains a detailed description of the
event including date and time, and any associated labels such as
zone and serial number. The detailed description of each system
event is pre-programmed and hard coded into the PCS250G.
MG/SP/E Trouble
Group
MG/SP/E Trouble Sub-Group
[4] Communication
Trouble
[7] Fail to communicate with receiver
[9] GSM network failure
[
OFF ] IP Receiver unregistered (IP/
GPRS)
[6] Trouble [6] Tamper trouble
[10] Module
supervision loss
[9] GPRS/GSM module
EVO
Trouble Group
EVO Trouble Sub-Group
[9] Communication
Trouble
[2] Tamper trouble
[5] Fail to communicate with receiver 1
[6] Fail to communicate with receiver 2
[7] Fail to communicate with receiver 3
[8] Fail to communicate with receiver 4
[9] IP Receiver unregistered (IP/GPRS)
MG/SP/E EVO Feature Details
[856] [2953] SMS
language
Values: 000-255 (see SMS
Language)
[780] [2954] Default: “Your Alarm Site”
To Next Page
Loading...
Need help?
General
