Paradox PCS250G User Manual

Module Supervision Page 31
Viewing GPRS IP Information with Digiplex EVO
1) To access Master Programming, enter the [MASTER CODE] then
press [0].
2) In Master Programming, press [2] to display the PCS250G IP
information.
3) The first screen displays the PCS250G IP Address. Press []
to access the next screen.
4) The second screen displays the PCS250G IP Port. Press []
to access the third screen.
5) The third screen displays the PCS250G User PC Software
Password. If you press [] again, the Exit Message will be
displayed.
Viewing GPRS IP Information with MG/SP / E-Series
1) Press the [] key.
2) Enter [
MASTER CODE].
3) To enter SMS Setup, press [
ARM].
4) Using the [] key, scroll up to [9] GSM IP Address and press
[
ENTER]. To return to the GSM menu, press [ENTER].
5) Using the [] key, scroll up to [10] GSM IP Port and press
[
ENTER]. To return to the GSM menu, press [ENTER].
6) Using the [] key, scroll up to [11] GSM PC Password
(Future use). To return to the GSM menu, press [
ENTER].
7) Using the [] key, scroll up to [12] Site Name. To return to
the GSM menu, press [
ENTER].
8) To exit the GSM menu, press [
CLEAR].

Paradox PCS250G Specifications

General

Brand	Paradox
Model	PCS250G
Category	Cell Phone
Language	English