12 User’s Manual
[8] Timer Loss
Your alarm system’s clock must be re-programmed. This is
the only trouble that we recommend that you correct.
[9] Tamper/Zone Wiring Failure
A wiring problem is occurring on one or more zones.
[10] Telephone Line Monitoring Failure
The system has not detected the presence of a telephone
line for more than 30 seconds.
[11] Fire Zone Trouble
A wiring problem on the fire zone is occurring.
[12] Module Loss
A module is no longer communicating with your system.
To re-program the clock press the [8] button after Step 2
from the Trouble Display (see “How Do I Access the Trouble
Display?” at the beginning of section 2.6) and enter the
current time using the 24-hour clock (i.e. 8:30PM = 20:30).
Also, see Appendix A.
To view which zones are experiencing trouble, press the
[9] button after Step 2 from the Trouble Display (see “How
Do I Access the Trouble Display?” at the beginning of
section 2.6).
To Next Page
Loading...
