32 User’s Manual
5.6.4 Cancel Communication
[ENTER] + [MASTER CODE] + [STAY]
Cancels all communication with the Winload software if it has
been initiated.
5.7 KEYPAD SETTINGS (For LCD Keypads only)
You can modify the keypad’s setting to suit your needs.
1) Press & hold [6] for 3 seconds
2) Choose one. Press:
[1] Backlight: the keypad’s light (7 is the brightest)
[2] Contrast: character intensity (7 is the lightest)
[3] Scroll: time between messages (7 is slowest)
3) Press [s] or [t] to modify
4) Press [ENTER] to save
5) Return to step 2 or [CLEAR] to exit
To Next Page
Loading...
