Spectra Keypads 29
For Spectra 1641 LCD Keypad:
To remove the Chime feature from a zone, in Step 3 re-enter
the two-digit zone number of the desired zone (i.e. to remove
Chime from zone 2, enter [0] then [2]) or press the [FNC1]
button when the bypassed zone appears on the screen.
5.2 KEYPAD MUTING
When muted, the keypad will only emit the confirmation beep,
rejection beep, and beep when a button is pressed.
Therefore, when muted, the keypad will not beep during an
alarm. Press and hold the [CLEAR] button for 3 seconds to
enable or disable Keypad Muting. If the keypad emits a
confirmation beep, Keypad Muting is enabled for that keypad.
If the keypad emits a rejection beep, the feature is disabled.
How Do I Chime Zones?
1) Press & hold the [9] button for 3 seconds
2) Enter the two-digit zone number of the
desired zone or use the [s] or [t]
buttons to view the zones and press the
[FNC1] button when the desired zone
appears on the screen.
3) Press the [ENTER] button to save & exit
To Next Page
Loading...
