Spectra Keypads 21
4.5 FORCE ARMING
Force Arming allows you to rapidly arm the system without
waiting for all zones in the system to close. During Force
Arming, a Force Zone is considered “deactivated” until it
closes, then the system will arm that zone. Force Arming is
commonly used when a motion detector is protecting the
area occupied by a keypad. For example, when arming and
the motion detector is a Force Zone, the system will allow you
to arm even if the zone is open.
Force Arming can also be activated by using One-Touch
Force Arming (see section 4.7.6).
How Do I Force Arm?
1) Close zones in the desired partition (except Force
Zones).
2) Press the [FORCE] button
3) Enter your [ACCESS CODE]
IF YOU HAVE ACCESS TO BOTH PARTITIONS (see section 2.7):
4) Press the button corresponding to the desired partition,
[1] or [2]. For both partitions, press the other button after
the confirmation beep.
To Next Page
Loading...
Need help?
General
