18 User’s Manual
4.3 REGULAR ARMING
This method will arm all the zones in the selected partition.
Please note that Regular Arming can also be activated using
Auto-Arming (see section 4.9), a Keyswitch (see section 4.8),
or One-Touch Arming (see section 4.7).
How Do I Disarm the System?
For a Stay or Instant Armed system, go to Step 2.
1) Enter through a designated entry point (i.e. front door).
2) Enter your [ACCESS CODE]
IF YOU HAVE ACCESS TO BOTH PARTITIONS (see section 2.7):
3) Press the button corresponding to the desired partition,
[1] or [2]. For both partitions, press the other button after
the confirmation beep.
How Do I Regular Arm?
1) Close all zones in the desired partition.
2) Enter your [ACCESS CODE]
IF YOU HAVE ACCESS TO BOTH PARTITIONS (see section 2.7):
3) Press the button corresponding to the desired partition,
[1] or [2]. For both partitions, press the other button after
the confirmation beep.
To Next Page
Loading...
