Spectra Keypads 25
Exit and Stay Arm: Press and hold the [STAY] button for 3
seconds (see Note1, p.23) to start the Exit Delay (see
section 4.1). When the Exit Delay elapses, the system will
return to Stay Arming.
Exit and Regular Arm: Press and hold the [ENTER] button for
3 seconds (see Note1, p.23) to start the Exit Delay (see
section 4.1). When the Exit Delay elapses, the system will
switch to Regular Arming (see section 4.3).
Exit and Force Arm: Press and hold the [FORCE] button for 3
seconds (see Note1, p.23) to start the Exit Delay (see
section 4.1). When the Exit Delay elapses, the system will
switch to Force Arming (see section 4.5).
4.7.6 One-Touch Force Arming
Press and hold the [FORCE] button for 3 seconds (see Note1,
p.23) to bypass any open Force Zones. For details on Force
Arming, refer to section 4.5.
4.7.7 One-Touch Bypass Programming
Press and hold the [BYP] button for 3 seconds (see Note1,
p.23) to access Bypass Programming Mode (see section
4.6).
To Next Page
Loading...
Need help?
General
